Kensington Painters & Decorators
Exteriors and joinery
A Kensington front and its timber are often written as one line and then prove to be four. Exterior painting, stucco painting, sash window painting and woodwork and trim each stop at a different edge. This page shows what belongs in each brief, what to photograph, and which materials should stay out of the coating.
Exteriors and joinery across Kensington (W8)
Exterior painting
Kensington's painted terraces and red-brick mansion blocks call for different briefs. Establish which parts of the elevation are intended to receive paint before deciding how the finished building should look.
Read about exterior painting 02Stucco painting
A Kensington stucco front is a composition of planes, shadows and mouldings. Repainting should start with the material beneath the coating and the relationship between the house and its neighbours.
Read about stucco painting 03Sash window painting
A Kensington sash window is both a painted architectural detail and a working assembly. Its glazing bars, meeting rails and box frame need an agreed scope that allows the window to remain useful.
Read about sash window painting 04Woodwork and trim painting
In a Kensington room with substantial skirtings, panelled doors or window shutters, the joinery carries much of the detail. A clear brief should describe its profiles and operation as carefully as its colour.
Read about woodwork and trim paintingWhat sits in each exterior and joinery service
Exterior painting is the schedule for an elevation as a set of surfaces: the front, the rear or a return, with a clear list of what is already coated and what must remain exposed. Painted ironwork and external joinery can sit inside that schedule when they are part of the same elevation and you have said so. Stucco painting is the narrower brief. It is for previously coated stucco, both the flat planes and the mouldings, and it stops where brick, terracotta or stone is meant to stay bare. Use it when the modelled face is the subject, not when every material on the front is still being sorted. Sash window painting treats the window as a working assembly rather than as a coloured rectangle. The scope has to say which faces are included, including edges that only show when the sash is open, and how the room will be ventilated while coatings cure. It is not an instruction to rebuild the box frame, and it is not an instruction to paint the wall around the opening. Woodwork and trim painting is the joinery of rooms and entrances: skirtings, doors, architraves, shutters and similar profiles. The aim is a film that follows the moulding and a sheen that suits hands and daily closing. A front door can appear in both an elevation note and a joinery note. Say which faces are outside and which face the hall, so the two services are not asked to price the same leaf twice.
Where the elevation stops and the joinery starts
Draw the boundary by material, not by a room name alone. Exterior painting stops being the best label when the only surface under discussion is the stucco, or the only surface is the sashes. The stucco page and the sash page ask better questions in those cases, and the elevation page is then only the place to record what else on the front is excluded. Stucco painting stops at timber. A sash set in a stucco surround is still a sash: the surround may be modelled render, while the frame and the meeting rails are joinery and take different preparation. Sash window painting stops at the plaster reveal. The inside faces of the sash can be included, but the wall beside the window is interior painting. A shutter that is really a piece of fitted joinery belongs with woodwork and trim when the shutter, not the sliding sash, is what you want painted. Woodwork and trim stops at the wall. It does not hang paper, settle a drawing-room scheme, or coat a stucco bay. If the joinery colour depends on a wall colour that is not yet chosen, that open choice belongs with colour consultation, while the condition of the timber stays here. Put the boundary in the enquiry in plain words: stucco only, sashes only, internal doors and skirtings, or the whole front excluding bare brick.
What to photograph, and who else must agree
For an elevation, send a view from the opposite pavement and closer photographs of anything cracked, stained, hollow or previously filled. Name the materials you believe are already painted and the ones you want left alone. For stucco, include the cornice, window surrounds and porch, and note any ledge where water sits or any crack that stays damp after rain. For sashes, photograph the window closed and, if you can do it safely, partly open. Say which rooms rely on that window for night air. For woodwork, list doors, skirtings and shutters room by room, and mark any leaf that must still latch each evening. Height belongs in the same note. Say whether the work is at pavement level, above a basement area, or high enough that access has to be discussed before a price is useful. Reserving a bay, where the job needs kerb space kept clear, follows the council’s suspension process. That process is separate from simply reading the hours on a resident bay, and it should not be assumed to sit inside a decorating price. In a managed building, record the hours, the protection of common parts, and whether external joinery or the outside of the entrance door is yours or the building’s. If you already have a listing letter or a conservation-area map extract, attach it. The service page cannot decide the designation. It can price the surfaces you have described.
Sources: RBKC: guide to parking; RBKC: about parking suspensions
Kensington materials that should not be coated as one thing
Kensington Court is a standing warning against one exterior sentence. The appraisal records late nineteenth-century red-brick houses and mansion flats, with stucco or terracotta used as contrast, and it records multi-storey mews that survive in the area. Exposed brick and terracotta are not assumed to be part of a repaint. The coated stucco, or the timber, may be. A mews front is often reached from a lane, which is a different access problem from a mansion-flat bay over a street. On Kensington Square, brick is recorded together with ornamental stucco, painted timber and painted ironwork. Stone-toned stucco is recorded as contributing to the square’s visual harmony, and Ansdell Terrace is recorded with consistently white-painted ground-floor stucco. Those notes are a reason to look along the row before you pick a tin. They are not a colour rule this website can apply to your own number. In South Kensington, the adopted appraisal’s documented terrace is nos. 2–54 even Queen’s Gate Terrace, built in 1859–60, Grade II listed, with ornate stucco and timber sashes. The decorating point is the split: ornate stucco and timber sashes are different services even on one listed front. On the Holland Park side, list entry 1080584 describes 81 Holland Park as a Grade II detached stucco house of 1862, with a cornice and cast-iron balconies, within that planned layout. It is an architectural example only. It is not a statement about the house next door, and it is not a project of this company. Photograph your own junction of brick, stucco, timber and metal, and send that instead of a general view of the street.
Sources: RBKC: Kensington Court appraisal; RBKC: Kensington Square appraisal; RBKC: Queen’s Gate appraisal; Historic England: 81 Holland Park
What Kensington appraisals change in an exterior or joinery brief
The Kensington conservation-area appraisal ties houses to a shared set of materials: London stock or gault brick, painted stucco render, and Welsh slate roofs. The choice between exterior painting, stucco painting and joinery starts from that set. The rendered face may be the coating. Exposed brick and the slate should be photographed and then kept out of the paint schedule unless that particular front has already been coated over them.
Decorative railings in the same conservation area are generally gloss black, and the appraisal treats that black as something which holds the streets together. They can sit in an exterior schedule when you have named them. They are not finished merely because the stucco is finished, and they are not the sash contract.
One documented front in the appraisal is a Grade II group of three stucco houses from 1829, with vertical sliding timber sashes. Render and timber are different services even on that single listed group. Use the elevation note to say which of them, together with any railings, are actually included.
Solvent limits sit beside those material choices. The VOC Regulations 2012 put coatings into categories, with a category of their own for products meant for outdoor walls of masonry, brick or stucco. When this group of services specifies a masonry coating for a rendered bay, that is the category to confirm on the schedule.
Sources: Royal Borough of Kensington and Chelsea, Kensington Conservation Area Appraisal; The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2012, Schedule 1
Adjoining streets and wider work
Exterior and joinery decorating of this kind continues on the adjoining streets. See Holland Park painters and decorators and South Kensington painters and decorators.
Where the elevation needs repair beyond decoration, that wider exterior work sits with Hampstead Renovations.
If the facade itself is failing, rather than only the coating, that investigation can be discussed with Hampstead Chartered Surveyors, our sister surveying and building consultancy firm.
Start with a conversation
Tell us about your property.
Share the address, the rooms or surfaces, and what you have in mind.
Your project details
Tell us what you would like to decorate and where.